All articles

    Who can do the hands-on evaluation for a scissor lift or boom lift?

    OSHA does not license lift evaluators. It asks for a qualified person. What that means, who usually fills the role, and a checklist for the evaluation.

    employersNovember 12, 2026

    A qualified person chosen by the employer. OSHA does not license or register lift trainers, so there is no outside list to pick from. The evaluator can be a supervisor, a safety manager, an experienced operator or an outside trainer, as long as they really know the machine and the hazards.

    This is the step that turns an online theory certificate into permission to operate.

    Quick facts

    • Who picks the evaluator: the employer

    • Standard they must meet: qualified, as defined in 29 CFR 1926.450(b)

    • OSHA license for evaluators: none exists

    • What they do: practical evaluation, familiarization on the make and model, sign-off

    • Where: at the workplace, on the actual lift

    What qualified means

    OSHA's scaffold rules define a qualified person as someone who, by a recognized degree, certificate or professional standing, or by extensive knowledge, training and experience, has shown they can solve problems related to the work. In practice that is a person who:

    • Has operated that class of lift for a good while without incidents

    • Knows the manufacturer's manual for the model

    • Knows the site hazards: slopes, drop-offs, overhead lines, traffic

    • Can tell a safe operator from an unsafe one and is willing to say so

    Being the boss is not enough. A foreman who has never run a boom should not be signing off boom operators.

    Who usually does it

    • A supervisor or lead hand with years on the equipment

    • The company safety manager

    • A rental company trainer, booked when the lift is delivered

    • An outside training company, for firms with nobody qualified in house

    Rental companies will also usually walk your operator through the specific machine at delivery if you ask. That covers familiarization for that model.

    What the evaluation should include

    1. Pre-use inspection. Tires, guardrails, gate, controls, emergency stop, emergency lowering, leaks, decals and manual on the machine.

    2. Work area check. Ground, slope, holes, overhead obstructions, power lines, people nearby.

    3. Function test from the ground controls and the platform controls.

    4. Operation. Drive, steer, raise, lower, position at a work point, and for booms, swing and extend.

    5. Fall protection. Gate closed on a scissor lift. Harness on and lanyard attached to the anchor point on a boom.

    6. Parking and shutdown. Lowered, key out, charger connected if electric.

    7. Emergency lowering, shown and then repeated by the operator.

    The evaluator watches, corrects, and only signs when the operator does it right without prompting.

    What to write down

    • Operator's name

    • Date

    • Make and model of the lift

    • Name of the evaluator

    • Result

    Keep it with the operator's theory certificate. Our course includes the theory certificate, which prints a verification link. The wallet card carries the QR code, and either can be checked on our verify page.

    Where the online course fits

    The theory course covers the knowledge side: the rules, the hazards, load limits, wind and power lines. It costs $39 per person, in English or Spanish. It saves the evaluator from running a classroom session, so the time on site goes to the machine.

    Scissor and aerial lift theory course

    Frequently asked questions

    Can I evaluate myself?

    No. Someone else who is qualified has to watch you.

    Can the evaluation be done over video?

    The evaluator needs to see you operate the real machine and be able to step in. Plan on doing it in person.

    Does the evaluator need a train-the-trainer certificate?

    OSHA does not require one. It requires the knowledge, training and experience to do the job. A trainer course is one way to show it.

    How often is the evaluation repeated?

    When the operator moves to a different type of lift, after an incident, when someone is seen operating unsafely, and at whatever interval the employer sets.

    Related articles