All articles

    How long does scissor lift or aerial lift certification last?

    OSHA sets no expiration date for scissor lift or aerial lift training. It sets retraining triggers instead. Here they are, with what employers usually do.

    equipmentNovember 12, 2026

    OSHA does not put an expiration date on scissor lift or aerial lift training. Instead it lists events that force retraining. Many employers add their own fixed interval on top.

    That means the honest answer to "is my training still good" is: it depends on your employer's rule and on whether anything has changed since you were trained.

    Quick facts

    • Fixed OSHA expiration date: none

    • Scissor lifts: retraining triggers in 29 CFR 1926.454(c)

    • Boom lifts: retraining triggers listed in OSHA's aerial lift fact sheet

    • Forklifts, for comparison: evaluation at least every three years under 29 CFR 1910.178(l)(4)(iii)

    • Who decides the interval for lifts: your employer

    When retraining is required

    Scissor lifts. The scaffold training rule says the employer must retrain when:

    1. The worksite changes and creates a hazard you were not trained on.

    2. The type of scaffold, fall protection or other equipment changes.

    3. Your work shows you have not kept the skill.

    Boom lifts. OSHA's fact sheet says retraining is needed when:

    1. An accident happens while a lift is in use.

    2. Workplace hazards involving the lift are discovered.

    3. A different type of lift is used.

    4. The employer sees a worker operating a lift improperly.

    The change most people miss

    A different type of lift counts. If you were trained and evaluated on a 19 foot electric scissor lift and the job now needs a 60 foot articulating boom, you need training on booms and familiarization on that machine. Your old card does not stretch to cover it.

    The same goes for a new model of the same type. The controls, the emergency lowering and the load chart can all differ. Your employer has to walk you through each make and model before you use it.

    What employers usually do

    • Set a refresher interval

    • Retrain sooner after an incident or a near miss

    • Keep a record of every familiarization, by make and model

    If you change jobs, expect the new employer to do their own hands-on evaluation even if your theory certificate is recent. That is normal. They are responsible for what happens on their site.

    Is a refresher worth it if nobody asked?

    If it has been a few years, or you are about to work on a type of lift you have not used, yes. The theory course is self-paced and costs $39. It is a small price next to showing up to a site and being sent home.

    Scissor and aerial lift theory course

    Frequently asked questions

    Does scissor lift training expire after three years?

    Not under OSHA's rule. Any fixed interval is an employer policy, not a federal deadline.

    I was trained at my last job. Is it still valid?

    The knowledge is yours, but your new employer still has to evaluate you and familiarize you with their lifts.

    Does forklift certification follow the same rule?

    No. Forklift operators must be evaluated at least once every three years. See forklift recertification.

    Do I get a new card when I retrain?

    With our course, yes. Passing again gives you a new certificate, and a printed card is mailed to you.

    Related articles